Mitsubishi FREQROL-U100 User Manual

(Operation with key pad)
The key pad operation (parameter No. 79 "1" ) is selected as the factory setting.
8 Frequency setting mode is entered.
o ~ Set frequency is changed.
8 Set frequency is fixed.
8 Motor starts (forward rotation) (Note),
rsroP1 Motor stops.
~
(Note)
To drive the motor in the reverse direction with thelRUNlkey, short-circuit
between STR and SO on the terminal block, or set parameter No.la to "2".
-18-

Mitsubishi FREQROL-U100 Specifications

General

Brand	Mitsubishi
Model	FREQROL-U100
Category	Inverter
Language	English