Mitsubishi MELSEC-A series User Manual

6. PROGRAMMING /MELSEC-A
c
1. Always write the two (upper and lower) words to the present value change
addresses simultaneously. Writing one word only will not change the present
value and will cause an error
to be flagged.
2. Zeroing will always set the present value back to the zero address, however
the zeroing data and the parameters should
b written to the buffer memory
before zeroing.
6-40
I6 IN41 68101-P.

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English