Mitsubishi MELSEC-A series User Manual

7. CHECK LISTS /MELSEC-A
7.2.2 Checking positioning operation
After completing the checks given in Section 7.2.1, move the key
switch on the AD71 front panel to "OFF" or '".PRO."
Set the speed limit parameter to a low value.
Zero the system and check positioning operation. Use the SWOGP-
AD71P monitoring function to check for error codes etc.
E
f
7 -3
IB INA) 66101C
t

Mitsubishi MELSEC-A series Specifications

General

Brand	Mitsubishi
Model	MELSEC-A series
Category	Controller
Language	English