Mitsubishi MELSEC-A series - Unit Installation and Removal

5. LOADING AND INSTALLATION /MELSEC-A
,--
5.3 Installation and Removal
(1 ) Installation
Base
Screw
(M4 x 0.7 x 12)
POINT I
1. Take cm not to damage the connector pins by forcing
the unit wrongly into place.
2. M4 x 0.7 x 12 screws may be used to secure the unit
against vibration, etc.
1 I
,
I
5-3
IB INAI 66101-A