Mitsubishi MELSEC-A series - 6.2 Notes on Use of the A6 GPP and AD71 TU

6. PROGRAMMING /MELSEC=A
6.2 Notes on Use of the A6GPP and AD71TU
1 ) Operation can be performed with the PC ready signal (Y 1 D) or
AD71 ready signal (X1 ) on or off.
2) Data cannot be transferred from or to the GPP when the AD71
is "busy" and the GPP (or AD71TU) is in test mode.
3) The M code is ignored. (Data in the M code area of the buffer
memory (X axis: 46, Y axis: 346) is cleared.)
I
i
I
6-5
I
-- I8 INAI 66101.A
i
t
i