Mitsubishi MELSEC-A series - Present Value Change

6. PROGRAMMING /MELSEC-A
6.3.8 Present value change
(1 ) Flow chart
Ensure that relevant axis is not
busy.
Write present value
to buffer
memory,
(2) Conditions
I Signal I Smtr
Romsrkr
I Relevant axis BUSY I OFF I I
Table 6.8 Present Value Chrnga Condition
(3) Program
[Example] To set the X axis present value to 500
[Data transfer]
ACPU data register
AD71 buffer memory
;et upper digit
of present value. Fi 1 X axis present value change dat
Set lower digit of present value.
[Program]
esent value
lgecommand
X4
X axis
-It
I Sets 500 to data register.
DTOP K1 1 X axis present value write
Dl5
K41
HO
6-39 i
IB INA) 66101.A
i