FX-TRN-BEG-E F: Advanced Challenge 6
B-65
6.1.3 Control Objective
Control the door which opens or closes when detecting a car.
6.1.4 Control Specifications
1) When the car comes near the opening, the door moves up.
2) When the car passes through the door, the door moves down.
3) The door stops moving up when
Upper limit
(X1) is turned ON.
4) The door stops moving down when
Lower limit
(X0) is turned ON.
5) While the car is still in the detection range between
In gate sensor
(X2) and
Out sensor
(X3), the door will not move down.
6)
Buzzer
(Y7) sounds while the door is in motion.
7)
Light
(Y6) is lit while the car is in the detection range between
In gate sensor
(X2) and
Out
sensor
(X3).
8) Four indicator lamps on the operation panel are lit or extinguished according to the
movement of the door.
9) The door can be opened/closed manually by pressing the buttons [
#
Door up] (X10) and
[
$
Door down] (X11) on the operation panel.
To Next Page
Loading...
