156
DELTA, DELTAP
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
Program Example
(1) The following program presets CH1 of the AD61 mounted at slot 0 of the main base unit, when X20 goes ON.
[Ladder Mode]
[List Mode]
Error
code
Error details
Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4101
The specified direct access output number exceeds the CPU module
output range.
Stores preset value (0) at addresses 1 and 2
of the AD61 buffer memory.
Outputs the preset command.
Step
Instruction
Device
To Next Page
Loading...
Need help?
General
