Mitsubishi MELSEC-Q/L - Emov, Emovp

257
EMOV, EMOVP
1
2
3
4
6
7
8
6.4 Data Transfer Instructions 6.4.2 EMOV, EMOVP
(2) The following program stores the constant K155 at D8 when X8 goes ON.
[Ladder Mode] [List Mode]
(3) The following program stores the data from D0 and D1 at D7 and D8.
[Ladder Mode] [List Mode]
(4) The following program stores the data from X0 to X1F at D0 and D1.
[Ladder Mode] [List Mode]
: Data to be transferred or number of the device to which the data to be transferred is stored (real number)
: The number of the device to which the transferred data will be stored (real number)
*1: Available only in multiple Universal model QCPU, LCPU
Function
Transfers 32-bit floating decimal point type real number data being stored at the device designated by to a device
designated by .
Operation Error
(1) There is no operation error in the EMOV(P) instruction.
6.4.2 EMOV, EMOVP Floa ting-point da ta transfer (Sin gle precision)
6.4.2 EMOV, EMOVP
• Basic model QCPU: The serial number (first five digits) is
"04122" or later.
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*1
––
–– ––
*1
–– ––
D8
1
00
1
00000000
1
0
1 1
b15
b8b7
b0
009BH
Step
Instruction
Device
Step
Instruction
Device
Step
Instruction
Device
Basic
Process
High
performance
Redundant Universal LCPU
Ver.
Command
Command
EMOV
EMOVP
S D
S D
EMOV
EMOVP
S
D
S
D
S
D
4.23542 4.23542
+1
+1
32-bit floating-point
real number
32-bit floating-point
real number
S DS D
Transfer