Mitsubishi MELSEC-Q/L User Manual

48
*1: The number of steps may vary depending on the device and type of CPU module being used.
Note 1) The number of steps may increase due to the conditions described in Page 110, Section 3.8.
*2: The number of steps may vary depending on the device and type of CPU module being used.
Note 1) The number of steps may increase due to the conditions described in Page 110, Section 3.8.
*3: The number of steps may vary depending on the device and type of CPU module being used.
Note 1) The number of steps may increase due to the conditions described in Page 110, Section 3.8.
Category
Instruction Symbol
Symbol Processing Details
Execution
Condition
Number of Basic Steps
Subset
See for Description
Block data
exchange
BXCH
4-
Page
271
BXCHP
Exchange of
upper and
lower bytes
SWAP
3-
Page
273
SWAPP
Component Device
Number of
Steps
QCPU
LCPU
• Word device: Internal device (except for file register ZR)
• Bit device: Devices whose device Nos. are multiples of 16, whose digit
designation is K4, and which use no indexing.
• Constant: No limitations
2
Devices other than above
3
Note 1)
Component Device
Number of
Steps
High Performance model QCPU
Process CPU
Redundant CPU
• Word device: Internal device (except for file register ZR)
• Bit device: Devices whose device Nos. are multiples of 16, whose digit
designation is K8, and which use no
indexing.
• Constant: No limitations
3
Devices other than above
3
Note 1)
Basic model QCPU
• Word device: Internal device (except for file register ZR)
• Bit device: Devices whose device Nos. are multiples of 16, whose digit
designation is K8, and which use no indexing.
• Constant: No limitations
(The number of steps is 3 when the above device + constant are used.)
2
Devices other than above
3
Note 1)
Universal model QCPU
LCPU
All devices that can be used
2
Note 1)
Component Device
Number of
Steps
QCPU
LCPU
• Word device: Internal device (except for file register ZR)
• Bit device: Devices whose device Nos. are multiples of 16, whose digit
designation is K4, and which use no indexing.
• Constant: No limitations
2
Devices other than above
3
Note 1)
BXCH nSD
n
(S)
(D)
BXCHP nSD
SWAP D
b0b15to tob8 b7
b0b15to
to
8 bits
b8 b7
(D)
(S)
8 bits
8 bits 8 bits
SWAPP D

Mitsubishi MELSEC-Q/L Specifications

General

Brand	Mitsubishi
Model	MELSEC-Q/L
Category	Controller
Language	English