632
SP.FWRITE
(c) When the designated file does not exist, a new file is created and the data is saved from the beginning of the file.
The attributes of this new file are set using the archive attributes.
(d) An error occurs when the saving space becomes full while data is added and saved.
In such a case, the data that is successfully added/saved remains in the medium.
The error completion is indicated after as much data as possible is added/saved.
(e) When the designated number of columns is "0", the data is stored as single-row data in CSV format file.
When data is written after CSV format conversion and the designated No. of columns is "0":
Example
H0100D10
SP.FWRITE
D10K2U0 D20 D99
M0
* Designation in word units
D11
D12
D13
D14
D15
D16
D17
D20
D21
D22
D099
D100
D101
D102
D103
D104
D105
D106
-
K0
K0
K0
K0
K0
H4241
H4443
H0045
K7
K0
K10
K20
K30
K40
K-50
K100
Execution/completion type
Not used
Wr
iting result (No. of written data) (In normal completion, it is the same number as the number of
data to be written.)
No. of columns designation
Data type specification
File name (If a file
name consists of 8 or less characters, "00"s are stored in the remaining area.)
"ABCDE"
No. of request write data
Write data
0
,
10 20 4030
,,
-50 100
,, ,
CR
LF
Data to be read out to EXCEL file
Data to be written to the file
Not used
-
File position
To Next Page
Loading...
Need help?
General
