636
SP.FWRITE
Program Example
(1) When X10 is turned ON, the following program adds four bytes of binaRY Data (00
H
, 01
H
, 02
H
, and 03
H
) to file
"ABCD.BIN" in the memory card inserted to drive 2.
• Assume that 8 points from are reserved for the control data devices.
[Ladder Mode]
[List Mode]
D0
Sets the number of request write data
Normal completion display
Sets the execution/completion type
Sets the designation of the number of columns
Sets the file name
Sets the data type specified
Error completion display
Sets the data to be written.
To Next Page
Loading...
