Mitsubishi MELSEC-Q/L User Manual

705
SP.CONTSW
1
2
11
4
4
6
7
8
11.1 SP.CONTSW
Program Example
(1) The following program executes system switching on the leading edge of the system switching command (M100).
If the system switching command (M100) remains ON, the SP.CONTSW instruction is also executed by the new control
system CPU module after system switching. Therefore, M101 is added to the execution conditions as a consecutive
switching prevention flag.
[Ladder Mode] [List Mode]
Instruction
Device
Step

Mitsubishi MELSEC-Q/L Specifications

General

Brand	Mitsubishi
Model	MELSEC-Q/L
Category	Controller
Language	English