Mitsubishi Q2ACPU User Manual

10.
10 - 1
OTHER FUNCTIONS
10 OTHER FUNCTIONS
10.1 Function List
The following list shows the rest of the functions.
For details of GPP function operation, refer to the GX Developer Operating Manual or the
Type SW IVD-GPPQ GPP Software package Operating Manual (Online).
For details of the Q6PU operation, refer to the Q6PU Operating Manual.
Item Description Reference
Constant scan
Performs a program at fixed intervals regardless of the
actual program scan time.
Section 10.2
Latch function
Retains the device data when resetting the CPU module
while the PLC power is OFF.
Section 10.3
Setting of the output status when
switching from STOP to RUN
Sets the output (Y) status when the CPU module is
switched from STOP to RUN (Re-outputting the outputs
before STOP/Outputting the outputs after performing
operation).
Section 10.4
Clock function Runs the internal clock of the CPU module. Section 10.5
Remote operation Operates the QnACPU from a remote place. Section 10.6
Remote RUN/STOP Starts or stops the CPU module operation. Section 10.6.1
Remote STEP-RUN Performs a step operation to the CPU module. Section 10.6.2
Remote PAUSE Suspends the CPU module operation. Section 10.6.3
Remote RESET Resets the CPU module. Section 10.6.4
Remote latch clear Clears the CPU module latch data. Section 10.6.5
Relationship between remote
operation and CPU module RUN/
STOP key switch
Explains the relationship between the CPU module
RUN/STOP key switch setting and operation when
performing remote operation.
Section 10.6.6
Terminal setting
Uses the Q6PU programming unit’s indicator and key
input.
Section 10.7
Message display Displays messages on the indicator of the Q6PU. Section 10.7.1
Key input operation Reads key input from the Q6PU. Section 10.7.2
Reading module access time
intervals
Monitors the access time intervals (The time between
the acceptance of one CPU module access and the
acceptance of the next CPU module access) for special
function modules, network modules, and peripheral
devices.
Section 10.8

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English