Mitsubishi Q2ACPU

5.
5 - 1
I/O NUMBER ASSIGNMENT
5 I/O NUMBER ASSIGNMENT
This section explains the method for I/O number assignment using the QnACPU to enable
data communications with a I/O modules and a special function module.
5.1 I/O Numbers
The I/O number is used in the sequence program to input data from a input module and to
output data to an output module.
The I/O number is expressed as three-digit hexadecimal numbers.
The I/O numbers when all the I/O modules are occupied in 16 points are indicated below.
REMARK
When programming with a peripheral device for GPP function, I/O numbers can be
input in 2 digits.
I/O numbers Input with a peripheral device
X010 X10
Y020 Y20
Concept of I/O numbers