17.
17 - 7
BASE UNIT AND EXTENSION CABLE
17.4 Handling Precautions
The handling precautions to be taken from unpacking to mounting a base unit are
described below.
The terminal connectors and pin connectors of the base unit are made of resin. Do not
drop them or apply heavy impact to them.
CAUTION
Do not remove the printed-circuit board from the base unit.
Doing so may cause failure, malfunctions, personal injuries and/or a fire.
Use caution to prevent foreign matter, such as dust or wire chips, from entering the
base unit during wiring.
Failure to do so may cause a failure, malfunction or fire.
To Next Page
Loading...
Need help?
General
