Mitsubishi Q2ACPU User Manual

App - 134
APPENDICES
4021H
CPU
module
file-related
error
Designated drive memory does
not exist or is abnormal.
The target dirve contains a
fault.
Check the status of the
designated drive memory.
4022
H
The file with designated file name,
and file No. does not exist.
The file name does not exist.
Check the designated file name
and file No.
4023
H
The file name and file No. of the
designated file do not match.
Cannot access files.
Delete the file and create a new
one.
4024
H
The designated file cannot be
accessed by the user.
This file cannot be handled. Do not access the designated file.
4025
H
The designated file is processing
a request from another source.
Alert (1) is displayed.
Forcibly perform the request.
Or perform the request again after
other processing has completed.
4026
H
The keyword set for target drive
memory has to be designated.
Keyword doesn't match.
Access by designating the
keyword set for the target drive
memory.
4027
H
The designated range exceeds
the file range.
File capacity is not enough.
Check the designated range, and
access within the permissible
range.
4028
H The same file has already existed. Alert (2) is displayed.
Forcibly perform the request.
Or change the file name and then
perform the request.
4029
H
The capacity of the designated file
is not secured.
File capacity is not enough.
Review the capacity of the
designated file.
Or sort the designated drive
memory and re-perform.
402A
H
The designated cluster No. does
not exist.
Cannot access files.
Check the designated cluster No.,
and access by designating a
cluster No. within the number of
clusters of the designated drive
memory.
402B
H
The request contents cannot be
performed with the designated
drive memory.
Cannot access files.
Do not make requests which
caused an error to the designated
drive memory.
402C
H
The request contents cannot be
currently performed.
Cannot access files.
Re-perform after the elapse of an
arbitrary time period.
4030
H
CPU
module
device
designation
error
The designated device name
cannot be handled.
Device is invalid.
Check the designated device
name.
4031
H
The designated device No. is out
of range.
Device No. is out of range. Check the designated device No.
4032
H
A mistake in the designated
device qualification.
Device is invalid.
Check the method for qualification
of the designated device.
4033
H
The designated device is for
system use and cannot be written
to.
Device is invalid.
Do not write data to the
designated device, or turn it ON/
OFF.
Error Code
(Hexadecimal)
Error Error Contents
Message Displayed
at Peripheral Device
Corrective Action

Mitsubishi Q2ACPU Specifications

General

Brand	Mitsubishi
Model	Q2ACPU
Category	Controller
Language	English