146 / 174
Service Manual Mitsubishi SQ-Series diesel engines
Version 08/2004
ENGLISH
PERFORMANCE TEST TESTING AND ADJUSTING
b Applicable range of engine factor (fm)
37.2 ≤ qc ≤ 65 mg/(
-cycle)
• qc ≤ 37.2 mg/(
-cycle) : fm = 0.2 (Constant)
• 65 mg/(
-cycle) ≤ qc : fm = 1.2 (Constant)
3) Range of correction equation use
The range of correction factor (
αc) use is as
follows: 0.9 ≤
αc ≤ 1.1.
If this range is exceeded, indicate the
corrected value and record the test conditions
on the test record sheet.
To Next Page
Loading...
Need help?
General
