Mitutoyo AT211 - 1.3 The Flow of Main Tasks

4
1 Overview
No. 99MBE011A
1.3
The Flow of Main Tasks
The following chart shows the ow of preliminary preparation and installation onto the machine main
unit as tasks to use this product.

Preliminary preparation
Checking the Equipment Model
"2.1 Checking the Equipment Model" (page 5)
Designing the Installation of the Scale Unit
"2.2 Designing the Installation of the Scale Unit" (page
8)

Installation onto the machine main unit
Checking the Package Contents
"3.1 Checking the Package Contents" (page 15)
Mounting the Scale Main Unit and
Adjusting the Position
"3.2 Mounting the Scale Main Unit and Adjusting the
Position" (page 16)
Mounting the Detector and
Adjusting the Position
"3.3 Mounting the Detector and Adjusting the Position"
(page 20)
Connecting and Fixing
the Signal Cable
"3.4 Connecting and Fixing the Signal Cable" (page
22)