Mitutoyo AT211 - 3 Installation onto the Machine Main Unit; 3.1 Checking the Package Contents

15
3 Installation onto the Machine Main Unit
No. 99MBE011A
3
Installation onto the Machine
Main Unit
This chapter describes the procedures, methods, and precautions required when mounting this prod-
uct onto the machine main unit.
3.1
Checking the Package Contents
Before installation, make sure that the product package contains the following items.
If your scale unit does not satisfy the specied specications or you have any questions or concerns
about the product, please contact your dealer or the nearest Mitutoyo sales o󰀩ce/service center.
Tips
The accessories of this product are di󰀨erent depending on the specications of the scale main unit.
Item Quantity Note
Scale unit One axis
Signal cable One cable
3 m, 5 m, or 7 m. This is not supplied for the one
detector cable type (without connector).
Accessories One set
Mounting screws, spacers, and intermediate sup-
ports. For details about the quantity of each acces-
sory, see
"6.1 Quantity of the Supplied Acces-
sories for Installation" (pages 45 and 46)
Connector set One set
This is not supplied for the one detector cable type
(without connector).
User's Manual One copy This document
Warranty card One copy
Inspection certicate One copy