© MOBATIME 100 / 120 800652.11
22 Wrong time zone DCF in Check time zone settings (time source).
23 Syn only diff too large Check synchronization and source
24 No mail server
Check e-mail configuration.
Observe file mailerror.txt in /ram/ for error correction.
25 SNMP not working Check SNMP and trap configuration.
26 Error bit26 Not used
27 Error bit27 Not used
28 Linie 2 current too high
Check MOBALine / Impulse line / DCF active line.
Alarm disappears only, if alarm is removed.
(Only active with DTS 4802)
29 Line 2 wrong time zone
Check time zone setting in (MOBALine / Impulse line)
(Only active with DTS 4802)
30 Error bit30 Not used
31 Error bit31 Not used
32-62 Error device 1-31
RS485 line: Device error for detailed error description see
chapter 6.5.8.
(Only active with DTS 4801)
To Next Page
Loading...
