Mobatime DTS 4802.masterclock - Communication Alarm Network (CAN) to MTC

© MOBATIME 52 / 120 800652.11
6.5.15 Communication Alarm Network (CAN) to MTC
Call menu: '2 Configuration  2 Time handling  4 CAN (MTC)':
1. CAN –mode on or off
If CAN is switched on, all the time source entries are accepted according to the set
values of the MTC CAN module U6.5. The time sources can no longer be changed if
CAN is switched on on the DTS 480x.
Attention:
If multicast is used, the local time source must be set to "local".
Otherwise, it can be set to "off".
!