© MOBATIME 65 / 120 800652.11
6.5.25 SNMP
For a description of SNMP functionality, see also Chapter “9 SNMP“.
1. Mode Mode. 0=off, 1=on. SNMP information of MIB 2 is always available.
Important:
To send out MIB-2 traps, the trap community and the destination address
must at least be configured in menu ’2. Configuration’
’3. Alarms’ ’3. Traps’ at least the trap community and the receiver must
be configured. See also chapter “6.5.21 SNMP Traps").
2. Alarm mask for SNMP status (see chapter "6.5.19 Alarm mask"). The modifications
will be saved or restored one menu level higher in “SNMP CONFIGURATION".
3. Location information which is displayed in SNMP management tool.
4. Contact information which is displayed in SNMP management tool.
5. Configuration of SNMP V1 / V2 c (specific settings). See chapter “6.5.26 SNMP V1
/ V2c“
6. Configuration of SNMP V3 (specific settings). See chapter “6.5.27 SNMP V3“
Important:
Each configuration change leads to a restart of the SNMP DTS Agent.
To Next Page
Loading...
