EMC INDUSTRIAL GROUP LTD Information & Resets
MW93A_IM_ALL_SV6.09f_en 51/59
Q92524 COM2 mode 8838 0
COM2 mode description
0 auto : use mwbus – automatic fall back to modbus slave
1 modbus : use standard modbus
Q92520 COM2 error count 8812
Display
Display settings
Q925692 disable touch 8514 1
Q925693 disable beeper 8518 0
Q925694 comms latency 8510 0 mS
May improve the select key performance for connections where there is a transport delay. For exam-
ple wireless links, routers etc.
Q925695 master mode option 1
master mode option description
0 auto
1 length framing : tolerates packet fragmentation
Length framing is necessary when connections are made through external hardware which fragment
the Modbus packets. For example wireless modems.
Q925696 view only 0
When set on, settings of the connected unit are view only. They can ont be edited.
Q925697 select loadcell transmitter 0
Shows the currently connected unit and allows it to be manually selected.
Q925698 select comm port 2
select comm port description
1 COM1 RS232 port
2 COM2 RS485 port
5 USB device (only if currently connected)
7 USB host (only if currently connected)
Shows the current comm port and allows it to be manually selected.
Q925699 select baudrate 0
select baudrate description
0 auto : scan through all baudrates to find a controller
1 fixed : use port baudrate setting
Q925690 connection test 0
Tests whether the connection to the connected transmitter or processor is working. Useful to diagnose
problems with communications links.
CompactCom
Q92571 reset CompactCom 8948 0
Information & Resets
Product Information
These settings can only be viewed, and show important features of the display.
Q92612 product serial number 8852
Q92613 software version number 8854
Q92614 CPU type 8858
Reset settings
Q92633 reset other settings (1= reset to defaults) 8954 0
Set to 1 to reset all user settings to the defaults.
To Next Page
Loading...