EMC INDUSTRIAL GROUP LTD Communications & Display
MW93A_IM_ALL_SV6.09f_en 46/59
Q25559 at 10Hz macro 2900, g13
This is the macro runs continuously 10 times per second.
These macros run at various points through the batching process.
Key Macros
These macros determine the behaviour of some of the opertor key functions. See also the ‘key macro
options’ (Q25524).
Q25571 start key macro 5000, g13
Q25572 pause key macro 5100, g13
Q25573 stop key macro 5200, g13
Q25574 start2 key macro 5300, g13
Q25575 stop2 key macro 5400, g13
Display (MD1,MD2,MP1,MP2)
Operator menu 1 locks
These settings allow operator menu items to be locked.
These settings allow functions assigned to the number keys to be locked (ie password protected, locked
out entirely or confirmation of the action requested).
setting lock function
0 Never locked
1 A pass code is required before the key may be used
2 The key is always locked and cannot be used
3 Confirmation of the key action is requested
Q25611 start lock 8620, g4
18
2
Q25612 stop lock 8622, g4
18
0
Q25613 toggle volumetric mode lock 8624, g4
18
0
Q25614 toggle remote mode lock 8626, g4
18
0
Q25615 set local flowrate lock 8628, g4
18
0
Q25616 set manual speed lock 8630, g4
18
0
Q25617 batch setpoint lock 8632, g4
18
0
Q25618 aquire zero lock 8634, g4
18
0
Q25619 reset total weight lock 8636, g4
18
0
Operator menu 2 locks
Q25621 print lock 8638, g4
18
0
Q25622 print total lock 8640, g4
18
0
Q25623 user function 1 lock 8642, g4
18
0
Q25624 user function 2 lock 8644, g4
18
0
Q25625 user function 3 lock 8646, g4
18
0
Q25626 operator menu 26 lock 8682, g4
18
0
Q25627 operator menu 27 lock 8684, g4
18
0
Q25628 operator menu 28 lock 8266, g4
18
0
Q25629 operator menu 29 lock 8268, g4
18
0
Operator menu 3 locks
Q25631 operator menu 31 lock 8650, g4
18
0
Q25632 operator menu 32 lock 8652, g4
18
2
Q25633 operator menu 33 lock 8654, g4
18
0
Q25634 operator menu 34 lock 8656, g4
18
0
Q25635 operator menu 35 lock 8658, g4
18
0
Q25636 operator menu 36 lock 8660, g4
18
0
Q25637 operator menu 37 lock 8662, g4
18
0
Q25638 operator menu 38 lock 8664, g4
18
0
Q25639 operator menu 39 lock 8666, g4
18
0
Operator menu 4 locks
Q25641 display select lock 8678, g4
18
0
Q25642 Alarm Menu lock 8688, g4
18
0
Display customisation
Q25651 identification line [0=off to 1=on] 8608, g4 1
Allows the top display line (identification line) to be turned off. This line shows the name of the
18
0=never locked, 1=locked with pass code access, 2=always locked (pass code = 99)
To Next Page
Loading...
