Impact Flowmeter Instrument MW94A
Instruction Manual ALL
MW94A_IM_ALL_SV6.09f_en
EMC INDUSTRIAL GROUP LTD
FEATURES
• Flowrate measurement for impact
weighers
• Flowrate Output
• Material Totaliser
• Modbus communications (independent
RS232 and RS485 ports)
• USB Host & Device (memory stick & PC)
• Field software upgrades
• 12-24Vdc power supply
• Overall accuracy better than 0.01%
MD2,MP2 INDICATOR
• IP54 Facia
• 2.8" (70mm) colour LCD
• 320 x 240 pixels
• Polyester film tactile keypad
• 4-20mA output, 1 digital input & 2 digi-
tal outputs
MO3 I/O for MP2
• 4 Digital inputs
• 4 Digital outputs
• 4-20mA input (or 0-10V)
• 4-20mA output
MD1,MP1 INDICATOR
• IP65 Facia
• 4.3" (109mm) colour LCD
• 480 x 272 pixels
• Silicone tactile keypad
MT1 TRANSMITTER
• Size 136 x 66 x 50mm
• Optional removable P-Module holds cali-
bration settings
MT3 TRANSMITTER
• Size 136 x 66 x 50mm
MR1 I/O
• Size 136 x 66 x 30mm
• 8 Digital inputs
• 8 Digital outputs
• 4-20mA input (or 0-10V)
• 4-20mA output x 2
• Pulse output
INCLUDES
• Installation
• Setting up principles
• Setup Summary
• I/O Function Table
• Operation
• Alarms
APPLIES TO
• MW94A - Impact Flowmeter P-Module
• MT1,MT3 - Transmitters
• MD1,MD2 - Display
• MP1,MP2 - Processor
• MR1 - Remote IO
• Software v6.09 onwards
MR1
MT3
MT1
MD2,MP2
MD1,MP1
To Next Page
Need help?
General