EMC INDUSTRIAL GROUP LTD Keys
MW94A_IM_ALL_SV6.09f_en 52/53
acquire zero
Press this key to zero the weight display.
user function 1
This key may be customised for a particular application.
user function 2
This key may be customised for a particular application.
user function 3
This key may be customised for a particular application.
Settings
batch setpoint
Press this key to display the BATCH WEIGHT setting. Use the keypad to set the batch weight.
speed demand
Press this key to display the SPEED DEMAND setting. If the speed demand is set using the keypad, the
controller is automatically put into volumetric mode.
Alarm menu
An alarm is indicated by a flashing alarm icon. An alarm number will flash in the display while a fault is
active or until it is acknowledged.
Press the ALARM key to see the alarm menu and acknowledge the alarms. The menu shows a list of the
previous alarms.
For details on an alarm in the list, use the UP, DOWN and ENTER keys, or key in the number next to
the alarm.
Press BACK to exit the alarm menu, or press 6 to clear the alarms and exit the menu.
To Next Page
Loading...