SETTING SUPPLY OPTIONS 4
This chapter explains how to set the ribbon, separators, print
position, supply position, margin position, and supply type.
You may need to set supply options when you change supplies.
The options are listed in the table below:
Option Choices Default
Ribbon No/Yes No
Separators Off/On Off
Print Position -99 to +99 0
Supply Position -99 to +99 0
Margin Position -99 to +99 0
Supply Type Black Mark/Die Cut Black Mark
To exit an option without changing the setting, press e.
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
RIBBON
MAIN MENU
MARGIN
POS
PRINT
POS
SUPPLY
POS
SUPPLY
TYPE
SEPARAT-
ORS
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
Setting Supply Options 4-1
To Next Page
Loading...
