Monarch 9403 - Setting Secondary Sign

To change the setting, from the Main Menu select Setup, then
Defaults. Then, follow these steps:
1. Press E. You will see the current setting, for example:
MONETARY SIGN
l USA r
2. Press L or R until you see the country’s monetary sign you
want.
3. Press E. Press e twice to exit to the Main Menu.
Secondary Sign
If you select USA as the monetary sign, you can print amounts
less than $1.00 either by using a dollar sign and decimal ($ .30)
or by using a cent sign (30¢).
u
If you set the secondary sign option to No, prices under $1.00
will print like this: $ .45
u
If you set the secondary sign option to Yes, prices under $1.00
will print like this: 45¢
The same option applies to the appropriate secondary sign for
monetary signs other than USA.
To change the setting, from the Main Menu select Setup, then
Defaults. Then, follow these steps:
1. Press L or R until you see
DEFAULTS
l Secondary Sign r
2. Press E. You will see the current setting, for example:
SECONDARY SIGN
No r
7-4 Setting Defaults