To reload the three standard formats and/or service-installed
formats: turn the printer off, wait five seconds, and then turn
on the printer. You will see:
PRINT MODE
Ready
Repeating a Batch
Before you start printing a new batch, you can reprint the last
batch. The batch can be the last one you printed completely, or
one that you canceled after starting to print.
1. From the Main Menu, press R or L until you see
MAIN MENU
l Repeat Batch r
2. Press E . You will see
Printing
xxxx of xxxx
The number increments until the entire batch has printed.
When it is finished, you will see
PRINT MODE
Ready
MAIN MENU
CANCEL
ALL
PRINT
MODE
SETUP DIAG.
BATCH
ENTRY
REPEAT
BATCH
Printing 8-7
To Next Page
Loading...
