COMMUNICATION VALUES 5
This chapter tells you how to set the User Communication
(User Comm) values. These values provide the link for normal
online printing.
You need to set your User Comm values to match your computer’s
online communications. Before entering the communication
values, see your System Administrator.
The communication values are listed in the table below.
Option Choices Default
Baud rate 1200/2400/4800/9600/19200 9600
Word length 7/8 8
Stop bits 1/2 1
Parity None/Odd/Even None
Flow control None/Xon/Xoff/DTR/CTS DTR
Reset No/Yes No
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
USER
COMM
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
Communication Values 5-1
To Next Page
Loading...
