Monarch 9403 - Setting Stop Bits; Setting Parity

Stop Bits
To change the setting, from the Main Menu select Setup, Port
Settings, then User Comm. Then, follow these steps:
1. Press L or R until you see
USER COMM
l Stopbits r
2. Press E. You will see the current setting, for example:
STOPBITS
1 r
3. Press L or R to display the number of stop bits you need,
then press E. Press e three times to exit to the Main
Menu.
Parity
To change the setting, from the Main Menu select Setup, Port
Settings, then User Comm. Then, follow these steps:
1. Press L or R until you see
USER COMM
l Parity r
2. Press E. You will see the current setting, for example:
PARITY
None r
3. Press L or R to display the parity you need, then press
E. Press e three times to exit to the Main Menu.
Communication Values 5-3