The test label displays
u
printer model number
u
software version number
u
number of inches printed to date
u
user COM port settings
u
a test pattern.
This information will help Technical Support diagnose the
problem. Refer to the Packet Reference Manual for more
information about the test label.
Checking Sensor Mark Quality
The printer continuously stores data from the most recent 16
supplies printed. This checks the quality of the sensor marks on
the supply.
Print a batch of supplies or test labels.
To check the sensor mark quality:
From the Diagnostics Menu, press L or R until you see
DIAGNOSTICS
User Diag
1. Press E. Press L or R until you see
USER DIAG
Supply Quality r
2. Press E. If you have not printed any labels, you will see a
message saying "No data."
Diagnostics 10-5
To Next Page
Loading...
