3. Press E. You will see
Enable Password?
No r
The default for password protection is "No," so you will
always see "No" even if passwords are enabled.
4. If you do not want the user to enter a password before they
can delete formats, graphics, fonts or clear flash, press E.
You return to the User Diagnostics Menu.
OR
Press R to display "Yes" and press E. The password
protection is enabled for formats, graphics, fonts, and flash.
You return to the User Diagnostics Menu.
5. Press e twice to exit to the Main Menu.
Service Diagnostics
The Service Diagnostics menu can only be accessed by a
Monarch Representative, because it requires a separate
password. If you have any problems, print a test label and call
Technical Support.
Diagnostics 10-7
To Next Page
Loading...
