Batch Separators
A batch separator is an extra tag printed between batches that
has a pinstripe pattern to make it easy to find.
To change the setting, from the Main Menu select Setup, then
Supply. Then, follow these steps:
Changing this setting only affects new
formats sent to the printer.
1. Press L or R until you see
SUPPLY
l Separators r
2. Press E to set the batch separators option. You will see
the current setting, for example:
SEPARATORS
Off r
3. Press L or R to see the other option. After you display the
option you want, press E. Press e twice to exit to the
Main Menu.
Batch Separator
Setting Supply Options 4-3
To Next Page
Loading...
