DIAGNOSTICS 10
This chapter explains how to perform simple diagnostic functions
such as checking the software version and sensor mark quality,
and printing a pattern or test label. This information will be
needed if you have to contact Technical Support.
Factory Set Password
You need a password for access to diagnostic functions.
The permanent factory-set password is
PPPE
VERSION USER DIAG.
SERVICE
DIAG.
TEST
LABEL
MAIN MENU
SUPPLY
QUALITY
TEST
PATTERN
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
PASSWORD
Diagnostics 10-1
To Next Page
Loading...
