Monarch 9403 - Printing a Test Pattern

Printing a Test Pattern
1. From the Diagnostics Menu, press L or R until you see
DIAGNOSTICS
l User Diag. r
2. Press E. You will see
USER DIAG
Supply Quantity r
3. Press R until you see
USER DIAG
l Test Pattern r
4. Press E. You will see
Label Width
[120/200]: +120
5. Press E. You will see
Print Quantity
[1/999]: +1
6. Press L or R to select the quantity of test patterns you want
to print. Press E.
The test pattern will look like this:
Diagnostics 10-3