3. Use the arrow keys to change the print position. Pressing R
increases the value (moves the image up); L decreases it
(moves the image down).
Press the arrow key once to change one number at a time.
4. Press E when the number you need appears. Press e
twice to exit to the Main Menu.
Supply Position
This function adjusts how much supply feeds out of the exit chute.
You may need to adjust the supply in or out to allow
u
tags and labels to be removed.
u
die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
u
Increase the number to feed more supply out of the chute.
u
Decrease the number to feed less supply out of the chute.
This option takes effect on the next label or tag printed.
Changing supply position may also affect print position.
To change the setting, from the Main Menu select Setup, then
Supply. Then, follow these steps:
1. Press L or R until you see
SUPPLY
l Supply Pos r
2. Press E. You will see the current setting, for example:
Enter supply pos
[-99/99]: +0
Setting Supply Options 4-5
To Next Page
Loading...
