To change the setting, from the Main Menu select Setup, then
Supply. Then, follow these steps:
1. Press L or R until you see
SUPPLY
l Margin Pos r
2. Press E. You will see the current setting, for example:
Enter margin pos
[-99/99]: +0
3. Use the arrow keys to change the margin position. Pressing
R increases the value (moves the image toward the right side
of the supply); L decreases it (moves the image toward the
left side of the supply).
u
Press the arrow key once to change one number at a time.
u
Press and hold the arrow key to change rapidly.
4. Press E when the number you need appears. Press
etwice to exit to the Main Menu.
Setting Supply Options 4-7
To Next Page
Loading...
