To use the standard formats:
1. From the Main Menu, press L or R until you see
MAIN MENU
l Batch Entry r
2. Press E. Press L or R until you see the format you want
to use.
The standard formats are
Fmt - 1 96
Fmt - 2 97
Fmt - 3 98
3. Press E. Follow the prompts to print the batch of labels.
Any other formats that you download remain in Batch Entry
until you turn off the printer. The standard formats are saved
when you turn off the printer; however, you must re-enter the
batch data.
If you saved your formats, graphics, or check digits in flash
memory, they are saved when the printer is turned off. For
more information about flash memory, refer to the Packet
Reference Manual.
Printing 8-17
To Next Page
