Printer
Display
Description/Action
POWER DOWN
Intr Test Failure
Interrupt test failed.
POWER DOWN
Low System RAM
Not enough RAM for system. All formats,
batches, graphics, and SETUP data are lost.
POWER DOWN
Illegal Intr#
Illegal interrupt occurred.
POWER DOWN
NMI Received
Non-maskable interrupt occurred.
POWER DOWN
Low Appl RAM
Not enough RAM for application. All formats,
batches, graphics, and SETUP data are lost.
POWER DOWN
NVRAM Sum Fail
RAM checksum test failed.
POWER DOWN
RAM Corrupt
Item storage RAM failed. All formats,
batches, graphics, and SETUP data are lost.
If the problem does not reoccur after you turn
your printer on again, see Chapter 5,
"Communication Values," to reset your
printer’s SETUP options. Resend your
packets.
Troubleshooting 11 - 15
To Next Page
Loading...
