SECTION SEVEN – TROUBLESHOOTING
DS2000 USER’S MANUAL (rev.C)
7.1
7. TROUBLESHOOTING
7.1 INTRODUCTION
This section lists typical troubleshooting conditions after a correct installation. A list of
check/correct action recommendations are listed for each condition. These action
recommendations are generally listed in order of decreasing likelihood for the stated
conditions.
The drive should be returned to Moog Service Centers if after the check/correct action the
troubleshooting condition persists. See also Chapter 6, par. 6.9 (Fault Detection Menu).
WARNING: Do not attempt to repair or make internal adjustments to the drive. Lethal
voltages are present and changes to factory calibration can result in serious equipment
and/or personnel risk.
To Next Page
Loading...
