SECTION FOUR – STARTING
DS2000 USER’S MANUAL (rev.C)
4.1
4. STARTING
4.1 INTRODUCTION
The purpose of this section is to provide a series of suggestions to make the first start-up of a
DS2000 drive, connected to a Moog motor, easier.
All the information hereinafter are easy and descriptive, in order to be clearly understood
even by personnel not skilled in servosystems installation.
Please, refer to the previous sections to search for any eventual missing information on cable
connections.
Please, refer to Section 6 for a detailed description of motor and drive parameters.
To Next Page
Loading...
Need help?
General
