PART NO.
DESCRIPTION
RECOMMENDED SPARES
652-011 Switch - Low Current Coil - Black
175-125-02 Connecting Link Assembly - Knife Hubs
175-13-01 Paper Guide Asssembly
175-20-01 Paper Gate Assembly
177-01-01 Perforator Assembly
176-213-02 Dynamic Blade Set - Wide
176-081-01 Worm Wheel - Gap Set
176-02-01 Blade Adjuster Assembly
602-160 Plain Bush - Dynacrease Guide Block
604-100 Gas Spring - Perf. Unit
604-103 Gas Spring - Delivery
607-005 Belt - Vacuum Roller
607-045 Multi Beam Coupler
607-175 Belt - Drive
610-030 Solenoid - Knife
607-171 Timing Belt - Drive
613-023 Fuse - Fast Blow Ceramic3.15A - 20 x 5mm -
613-351 Micro Switch - Guard
613-255 Solenoid - Valve
613-365 Emergency Stop Switch - Double Pole
626-007 Anti-Static Sensor Bar
652-040 Switch Thermal O/Load 12A Black
655-011 Power Supply Unit - Switched Mode - 24V
681-011 Fuse - 315mA - 20 x 5mm Anti-surge - Ceramic
76-240 Stepper Motor - Drive
681-019 Fuse - 6.3A - 20 x 5mm - Anti-surge Ceramic
76-156 Lead - Blade position Sensor
Page 49
SYSTEM
175-125-01 Connecting Link Assembly - Drive
176-213-01 Dynamic Blade Set - Narrow
75-258 Anti - Static Transformer
175-21-01 Vacuum Roller
NOTE.....
The items listed above represent parts which are subject to wear, loss, or accidental
damage, and is included for your guidance only.
Replacement of parts fitted to your machine require specialist knowledge and should
therefore be entrusted to your dealer.
Digifold 5000P
To Next Page
Loading...
