Morgana Digifold 5000P - Default Chapter; Index

Page 2
INDEX
10
10
11
11
11
11
11
12
13
14
14
15
16
SET BY FOLD
19
SET BY POSITION
25
26
Adjusting the Papergate
Setting the Suction Slot
Setting the Vacuum Bleed
Setting the Adjustable Side Lay
Setting the Back-Stop
Setting the Air Distribution
Setting the Air Separation Pressure
Setting the Blade Tilt Mechanism
Setting the Roller Gaps (Gap 1, Gap 2 & Gap 3)
Gap Set Guide Table
Fold Type Table
Setting the Positions of the Drive Wheels and Hubs
Setting the Delivery Conveyor System
Setting the Paper Length
Setting the Process (
Setting the Crease Positions
Setting the Fold Positions
(
(
Crease & Fold, Crease Only, Fold Only
or No Crease or Fold).
Crease & Fold, Crease Only, Fold Only
or No Crease or Fold).
19
20
20
20
21
21
24
Setting the Fold Type
Setting the Batch Quantity
Storing the Program
Adjusting the Crease Positions
Adjusting the Fold Positions
Setting the Process (
Example of Set by Position
Feeding Sheets Manually
27
28
CREASING / FOLDING
INTRODUCTION & SPECIFICATION
PAGE 4
SAFETY Do’s & Don’ts 5
THE DIGIFOLD 5000P
7
THE CONTROL PANEL
8
9
The Morgana Digifold 5000P
Labeled Photograph
Detailed diagram and description
Features on the control panel
OPERATING THE DIGIFOLD 5000P