Operation
January 2019 5-21
Controller Options - Continued
Topcon - X35 Apollo - Continued
Hydraulic Pressure Control Setup - Continued
3. Pack Control Window
Drill Track Control - When Master Switch is activated
Lift / Lower will be automatically engaged.
4. Set the target Pack force by pressing the desired
preset icon. The Target Pack Force will now be
displayed in the window..
Target - Pressure
Increase / Decrease
Preset 1 - 2
Current
Hydraulic Pressure
AUTO MODE / Manual Mode
(Set to Auto)
FLOAT MODE - Turns
Pack Control ON / OFF
Drill Track Control
(Auto Lift)
Lift Control (Up / Down)
Over Ride
Target - Pressure
Preset 1 - 2
To Next Page
Loading...
