Operation
January 2019 5-27
Controller Options - Continued
Topcon - X35 Apollo - Continued
Pack Control Setup - Continued
6. Testing Operation - With the tractor Hydraulics ON,
the openers should be in the UP position. When
Master Switch is engaged the openers will be lower
into the working position automatically.
Note: Operator will have to be aware of changing
soil conditions across drill as Load Cell
maybe in softer or harder soil than the rest
of the drill.
7. Special Operation - ON/OFF button when toggled
to OFF, allows the openers to Float over terrain in the
downward working position with no pressure applied.
This function is useful when travelling over a wash
outs or in muddy conditions when the unit is on the
verge of becoming stuck.
To Next Page
Loading...
