Motoman NX 100 User Manual

6.1 Header Number List
6-2
265
Spot welder condition data SWELDER.DAT
413
Clearance setting data CLEARNCE.DAT
240
System information SYSTEM. SYS
241
Alarm history data ALMHIST. DAT
02, 300
Request for tool data TOOL.CND
301
Request for weaving condition data WEAV.CND
302
Request for user coordinate data UFRAME.CND
303
Request for welding start condition data ARCSRT.CND
304
Request for welding end condition data ARCEND.CND
318
Request for motor gun pressure data SPRESS.CND
319
Request for pressure data SPRESSCL.CND
320
Request for open/full open position data STROKE.DAT
321
Request for spot I/O allocation data SPOTIO.DAT
322
Request for air gun condition data AIRGUN.DAT
330
Request for weld auxiliary condition ARCSUP.DAT
332
Request for variable data VAR.DAT
344
Request for shock detection level SHOCKLVL.CND
350
Request for power source condition data WELDER.DAT
351
Request for power source user definition data WELDUDEF.DAT
364
Request for spot gun condition data SGUN.DAT
365
Request for spot welder condition data SWELDER.DAT
513
Request for clearance setting data CLEARNCE.DAT
340
Request for system information SYSTEM.SYS
341
Request for alarm history data ALMHIST.DAT
03, 001
Byte type variable
002
Integer type variable
Contents File Name

Motoman NX 100 Specifications

General

Brand	Motoman
Model	NX 100
Category	Controller
Language	English