Motorola APX 1000 - Figure 8-30. Assemble the Keypad

8-22 Disassembly/Reassembly Procedures: Radio Reassembly
8.6.3 Reassemble the Keypad (25)
NOTE: Please order keypad with required language.
1. Place the Keypad (25) into the Front Housing (16) and gently flush the mushroom rib at the
edges of the Keypad into the Front Housing with the aid of the back of the Black Stick.
Figure 8-30. Assemble the Keypad
When flushing the Keypad, care is needed to avoid damage
to the Keypad.
Ensure that the Keypad is fully flushed to prevent leakage.
!
Caution
Black Stick’s Back