Motorola APX 1000 - ASTRO APX 2000;APX 4000;APX 4000 Li 700;800 Mhz Model Chart (Continued)

xviii ASTRO APX 2000/APX 4000/APX 4000Li 700/800 MHz Model Chart (Continued)
ASTRO APX 2000/APX 4000/APX 4000Li 700/800 MHz Model Chart
(Continued)
MODEL DESCRIPTION:
Non-BT Models FCC ID:
BT Models FCC ID:
700–800, APX 2000/APX 4000/APX 4000Li
AZ489FT7050
AZ489FT7049
H52UCD9PW5AN Model 1.5 APX2000, 764–870MHz, 1.0–3.9 Watts, Standard Control
H51UCD9PW5AN Model 1.5 APX4000 Li, 764–870MHz, 1.0–3.9 Watts, Standard Control
H52UCF9PW6AN Model 2 APX2000, 764–870MHz, 1.0–3.9 Watts, Limited Keypad
H51UCF9PW6AN Model 2 APX4000, 764–870MHz, 1.0–3.9 Watts, Limited Keypad
H52UCH9PW7AN Model 3 APX2000, 764–870MHz, 1.0–3.9 Watts, Full Keypad
H51UCH9PW7AN Model 3 APX4000, 764–870MHz, 1.0–3.9 Watts, Full Keypad
ITEM NUMBER DESCRIPTION
XXXXXX 5478220A01 Label, Ventilation
●●●● 54012196001 Label, Front_NamePlate (Bluetooth Blue Dot – Expanded)
●●●●●● 54012196002 Label, Front_NamePlate (Non-Bluetooth – Basic)
● ● ● 54012198001 Label, Back (APX 2000)
● ● 54012198002 Label, Back (APX 4000)
● 54012198003 Label, Back (APX 4000Li)
XXXXXX 54012241001 Label, Bottom
●●●●●● 54012255001 Label, Front, Color Talk Group
O
O
OOOO 54012230001 Label, FM
XXXXXX 36012020002 Knob, Multi Function
XXXXXX 15012142001 Cover, Accessory-Connector
XXXXXX PMLN5997_ User Guide CD, APX 2000 and APX 4000
Note:
X = Item Included.
● = Option available. Can be serviced in depot and ordered thru AAD.
O = Option available. Can be serviced in depot and orderable by FM qualified customers/dealers only. For APAC – Only FM label can be replaced
and purchased by Motorola.
• Refer
Appendix A for antennas, batteries and other applicable accessories.
* The radio’s model number and FLASHcode are required when placing an order for the Main Board.
• The model number and (sometimes) the FLASHcode can be found on the FCC label on the back of the radio.
• The model number and the FLASHcode can be found by putting a Model 1.5, 2 or 3 radio into the Test Mode.
• The model number and FLASHcode can be found by using the Programming Cable (PMKN4012B or PMKN4013C) and the CPS to
read a Model 1.5, II, or III radio.